|
| |
|
|
| |
 |
|
| |
|
|
| |
|
Notation |
|
|
| |
|
| |
|
| |
|
|
Power |
|
| |
 |
When not used for an extended period of time, set your computer to DPMS.
If using a screen saver, set it to the active screen mode. |
| The images here are for reference only, and are not applicable in all cases (or countries). |
|
|
 |
 |
Do not use a damaged or loose plug.
- This may cause an electric shock or fire.
|
|
 |
|
Do not pull the plug out by the wire nor touch the plug with wet hands.
- This may cause an electric shock or fire.
|
|
 |
|
Use only a properly grounded plug and receptacle.
- An improper ground may cause electric shock or equipment damage.
|
|
 |
|
Insert the power plug firmly so that it does not come loose.
- A bad connection may cause fire.
|
|
 |
|
Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.
- This may cause an electric shock or fire.
|
|
 |
|
Do not connect too many extension cords or plugs to an outlet.
|
|
 |
|
Do not disconnect the power cord while using the monitor.
- A surge may be caused by the separation and may damage the monitor.
|
|
 |
|
Do not use the power cord when the connector or plug is dusty.
- If the connector or plug of the power cord is dusty, clean it with a dry cloth.
- Using the power cord with a dusty plug or connector may cause an electric shock or fire.
|
|
|
| |
|
| |
|
| |
|
|
Installation |
|
| |
|
|
Be sure to contact an authorized service center, when installing your monitor in a location with the heavy dust, high or low temperatures, high humidity, chemical substance and where it operates for 24 hours such as the airport, the train station or etc.
Failure to do so may cause a serious damage to your monitor. |
|
 |
|
Put your monitor in a location with low humidity and a minimum of dust.
- Failure to do so may cause an electric shock or fire inside the monitor.
|
|
 |
|
Do not drop the monitor when moving it.
- This may cause damage to the product or human body.
|
|
 |
|
Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf.
- Dropping the product may cause damage to the product or personal injury.
|
|
 |
|
Do not place the product on an unstable or small surface area.
- Place the product on an even, stable surface, as the product may fall and cause harm to someone walking by, specifically children.
|
|
 |
|
Do not place the product on the floor.
- Someone, specifically children could trip over it.
|
|
 |
|
Keep any flammable objects such as candles, insecticides or cigarettes away from the product.
- Otherwise, this may cause a fire.
|
|
 |
|
Keep any heating devices away from the power cable.
- A melted coating may lead to electric shock or fire.
|
|
 |
|
Do not install the product in places with poor ventilation, for instance, a bookshelf, closet, etc.
- Any increase in internal temperature may cause fire.
|
|
 |
|
Set down the monitor carefully.
- The monitor could be damaged or broken.
|
|
 |
|
Do not place the monitor face down.
- The TFT-LCD surface may be damaged.
|
|
 |
|
Installing a wall bracket must be done by a qualified professional.
- Installation by unqualified personnel may result in injury.
- Always use the mounting device specified in the owner's manual.
|
|
 |
|
When installing the product, make sure to keep it away from the wall (more than 10cm/4inch ) for ventilation purposes.
- Poor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance.
|
|
 |
|
Keep the plastic packaging (bag) out of children’s reach.
- The plastic packaging (bag) may cause suffocation if children play with it.
|
|
|
| |
|
| |
|
| |
|
|
Clean |
|
| |
|
|
When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric. |
|
 |
|
Do not spray water or detergent directly on the monitor.
- This may cause damage, electric shock or fire.
|
|
 |
|
Use the recommended detergent with a smooth cloth. |
|
 |
|
If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth.
- A dirty connector may cause an electric shock or fire.
|
|
 |
|
Make sure to unplug the power cord before cleaning the product.
- Otherwise, this may cause electric shock or fire.
|
|
 |
|
Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth.
- Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent.
|
|
 |
|
Contact the Service Center or Customer Center for interior cleaning once a year.
- Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause malfunction or fire.
|
|
|
| |
|
| |
|
| |
|
|
Others |
|
| |
 |
|
Do not remove cover (or back).
- This may cause an electric shock or fire.
- Refer servicing to qualified service personnel.
|
|
 |
|
If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service.
- This may cause an electric shock or fire.
|
|
 |
|
Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle.
- This may cause malfunction, an electric shock or fire.
- Especially avoid operating the monitor near water or outdoors where it could be exposed to snow or rain.
|
|
 |
|
If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact the Service Center .
- The monitor may malfunction, causing an electric shock or fire.
|
|
 |
|
Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time.
- Failure to do so may cause an electric shock or fire.
|
|
 |
|
Do not try to move the monitor by pulling only the wire or the signal cable.
- This may cause a breakdown, electric shock or fire due to damage to the cable.
|
|
 |
|
Do not move the monitor right or left by pulling only the wire or the signal cable.
- This may cause a breakdown, electric shock or fire due to damage to the cable.
|
|
 |
|
Do not cover the vents on the monitor cabinet.
- Bad ventilation may cause a breakdown or fire.
|
|
 |
|
Do not place water containers, chemical products or small metal objects on the monitor.
- This may cause malfunction, an electric shock or fire.
- If a foreign substance enters the monitor, unplug the power cord and contact the Service Center.
|
|
 |
|
Keep the product away from combustible chemical sprays or inflammable substances.
- This may cause an explosion or fire.
|
|
 |
|
Never insert anything metallic into the monitor openings.
- This may cause an electric shock, fire or injury.
|
|
 |
|
Do not insert metal objects such as chopsticks, wire and gimlet or inflammable objects such as paper and match into the vent, headphone port or AV ports.
- It may cause a fire or an electric shock. If an alien substances or water flows into the product, turn the product off, unplug the power connector from the wall outlet and contact service center.
|
|
 |
|
If you view a fixed screen for an extended period of time, residual image or blurriness may appear.
- Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time.
|
|
 |
|
Adjust the resolution and frequency to the levels appropriate for the model.
- Inappropriate resolution may cause undesirable picture quality.
| 27 inch (68 cm) |
- 1920 x 1200 |
|
|
 |
|
Watching the monitor continuously at a too close angle may result in eyesight damage. |
|
 |
|
To ease eye strain, take at least a five-minute break after every hour of using the monitor. |
|
 |
|
Do not install the product on an unstable, uneven surface or a location prone to vibrations.
- Dropping the product may cause damage to the product or personal injury. Using the product in a location prone to vibrations may shorten the lifetime of the product or may catch fire.
|
|
 |
|
When moving the monitor, turn
off and unplug the power cord.
Make sure that all cables, including the antenna cable and cables connecting to other devices, are disconnected before moving the monitor.
- Failure to disconnect cables may damage it and lead to fire or an electric shock.
|
|
 |
|
Place the product out of children's reach, as they could damage it by hanging
onto it.
- A falling product could cause physical damage even death.
|
|
 |
|
When not using the product for an extended time period, keep the product unplugged.
- Otherwise, this may cause heat emission from the accumulated dirt or
degraded insulation, leading to electric shock or fire.
|
|
 |
|
Do not place children's favorite objects (or anything else that may be tempting)
on the product.
- Children may try to climb on the product to retrieve an object.
The product could fall, causing physical damage or even death.
|
|
 |
|
When lifting up or moving the monitor, do not lift the monitor upside down while holding only the stand.
- This may cause your monitor to fall, and become damaged or cause personal injury.
|
|
| |
|
|
|
Good Postures When Using the Monitor |
|
| |
|
|
 |
|
Try to maintain a good posture when using the monitor. |
- Keep your back straight.
- Keep a distance of about 45 ~ 50 cm between your eyes and the monitor screen. Look at the screen from slightly above it, and have the monitor directly in front of you.
- Tilt the monitor upwards by 10 ~20 degrees. Adjust the monitor height so that the top of the monitor is slightly below eye level.
- Adjust the monitor angle so that there is no reflected light on the screen.Try to maintain your arms perpendicular to your armpits.
- Keep your arms level with the back of your hands.
- Keep the angle of the elbow perpendicular.
- Keep the angle of the knees at more than 90 degree. Do not let your feet fall up from the floor. Adjust the arm position so that it is below the heart
|
|
|
|
|
|
| |
|
|
|
|
|
